Do you have a vehicle with steering wheel buttons and want to upgrade your headunit with a "high performance" system and realised the steering wheel buttons won't work? 

If so you'll need THE CAT.  It's a car audio steering wheel interface that allows you to replace the standard audio system, whilst retaining the steering wheel audio functions.

HOW DOES THE CAT WORK?

1.    THE CAT recieves a signal when a button is pressed from the 
        steering wheel.

2.    THE CAT then converts the signal to be understood by the headunit.

3.    THE CAT then sends the signal either via infrared or direct connect
       to the headunit.

No programming involved - frequencies are already programmed in therefore no delay between button presses.

AFTER MARKET HEADUNIT & VEHICLE COMPATIBILITY

It suitable for the following vehicles with standard steering wheel controls:

Aftermarket headunits with either infrared capabilities or 
3.5mm jack for direct connect:

*The CAT10 now comes with the direct connect capabilies 
so you can connect straight to Alpine, Clarion, Eclipse 
and Kenwood headunits with the 3.5mm jack.

We recommend THE CAT is installed by a qualified car audio installer.